Aluma Dek
- - Lighter than any comparative product in the
industry
- - Highly efficient, costing less per use than
comparable deck systems
- - Faster pour cycles
- - Faster assembly
- - Lighter to carry
- - Labor friendly
|
 |
|
|
Aluma Truss
- - One-time assembly reduces labor costs
- - Compatible with the extensive range of the
Aluma Beam®
- - Reduces construction cycle times
- - Modular design simplifies assembly of forms
- - A full range of handling accessories available
- - Fiberglass Removal (High Frequency Induc-
tion Stripping)
|
 |
|
|
Aluma Frame Table
- - Cuts equipment and labor costs up to 50%
over steel systems
- - Strength to weight ratio nearly 3x that of
steel frames
- - Light enough for one person to carry
- - Single Frame leg functions as a post shore at
twice the capacity of a standard steel post
- - Wider frames reduce the number of shoring
frames needed
|
 |
|
|
Aluma Alumacs
-
- Lightweight aluminum construction reduces
labor costs
- - Steel braces and screwjacks for increased
durability and strength
- - Compatible with the full range of Aluma
Beam® and Stringer
- - Modular design increases flexibility and
simplicity
|
 |
|
|
Alumalite Truss
- - Allows the use of extension staffs at the top
and bottom of the table forms
- - Can adapt to most slab and beam configura-
tions
- - Compatible with the full range of Aluma
Beam® and Stringers
- - Modular design simplifies assembly
- - The most versatile truss system available
- - Reduces construction cycle times
|
 |
|
|
Aluma Hi-Load
- - Meets the most rigorous job-site require-
ments
- - Combines strength and durability of steel with light-weight Aluma Beam
- - Widely recognized as the preferred system
among contractors as labor friendly
- - Includes a complete range of accessories and frame sizes
- - Allows large mobile tables to be easily assembled
- - Maximum flexibility to meet any job condition
|
 |
|
|
Aluma Hi-Flyer
- - A superior column-hung system designed for
creating large tables forms
- - Contractors are able to complete floors at a
blazing rate of 1 every 3 days
- - Overall production time improves by 25-30%
- - Reshoring can be completely eliminated
- - Engineered by our experienced, safety-
award-winning team
- - Provides earlier access to floors below table
level for other trades
|
 |
|
|
Aluma Crane Set
- - Ideal for water and sewage treatment plants,
power plants, bridges, high rises and other
jobs
- - Low re-use wood forms bolt easily to versa- tile Crane Set System
- - High walls go up fast with quickly assembled gangs
- - Lift eyes attach to walers for safe gang movement
- - Works well with self-climbing raisers on high rise projects
|
 |
|
|
Aluma Hand Set
- - 60% faster than job-built plywood forms
- - 30% lighter than comparable modular
systems
- - 1,200 psf pour rate; 1, 500 psf for columns
- - Panels bolt directly to Aluma Crane-Set
systems
- - Only tool required to erect the forms is a
hammer
- - Alignment walers attach with one-piece waler
clamp
|
 |
|
|
Aluma Rollback
- - Requires less handling than conventional wall forms
- - Shorter crane cycles: form can be moved
quickly and easily
- - Increased safety: workers are off the form
while supported by the crane
- - Increased productivity: greater efficiency on
the wide platform
|
 |
|
|
Aluma Gang Form
- - Combines the versatility of Aluma Beam with
the unequaled strength of the aluminum 55K
Strongback
- - Can be used for all wall form configurations
while maximizing labor savings
- - Made of lightweight, high strength aluminum
- - Quick and easy assembly
- - Versatile wall form system
|
 |
|
|
Aluma EasySet
- - Lightweight, economical, all aluminum panel system.
- - Can be used in monolithic or two stage casting.
- - Easy to handle and erect.
- - Integrated face sheet and rails minimizing welding and maintenance.
- - Quick strike chamfers allow for easy removal of slab and wall panels.
|
 |
|
|
Aluma Beam
- - Greater strength to weight ratio than steel or
wood
- - Versatile enough for all concrete forming
needs
- - Plastic nailer-strip can last four times longer
than wood
- - Special aluminum alloy
- - Heavy top flange for increased strength and reduced damage
|
 |
|
|
Aluma HD Post Shore
- - High-load capacity of 14,000 lbs. (62 kN) at
8 ft. (2.43m)
- - Reduces the number of post shores by 50%
- - Greater re-shoring spacing allows sub-
contractors earlier access to work space
- - L-shaped handle provides easier fine
adjustment
- - Optional galvanized tripod makes the
erection process faster and easier
|
 |
|
|
Aluma Frame
-
- Cuts equipment and labor costs up to 50% over steel systems
- - Strength-to-weight ratio nearly three times that of steel frames
- - Light enough for one person to carry
- - Single Frame Leg functions as a post shore at twice the capacity of a standard steel post
|
 |
|
|
Aluma Flipper Lock
- - Provides a safe means for supporting the inner wall forms for elevator core forming.
- - Integrated upper stop plate provides a safety back up for the main support plate
- - Movement from level to level requires no disassembly
- - Platform may be raised independently or together with the wall forms
|
 |
|
|
Aluma Twist Lock
- - Greater spacing between post shores creates safer ‘trip-free’ work areas.
- - Adaptable and is compatible with Aluma’s other proven shoring systems
- - Heavy Duty Post Shore’s captive design means less maintenance, loss and damage
- - The system’s higher capacity means less equipment and greater cost savings
- - Galvanized Tripods and Bracing frame make the erection process faster and easier.
|
 |
|
|
